QuestionI can only operate all three non drivers power windows from the drivers door. The separate swiches don't work. I think it's the lock out button. How do I check it? How do I remove the door panel? thank-you very much.
AnswerFRONT DOOR TRIM PANEL
REMOVAL
Roll window down.
Remove window crank, if equipped Window Crank - Typical
Remove the screws attaching the trim panel to the door inner panel Front Door Trim Panel-Manual Window and Front Door Trim Panel-Power Window
Separate the trim panel fasteners from door inner panel with a pry tool (use special tool C-4829) Detaching Trim Panel Push-In Fasteners
Lift the trim panel up and outward to separate from the inner belt seal.
Move the door trim panel outward and disconnect the handle-to-latch rods.
Disconnect the power door locks/windows/mirrors wire harness connectors, if equipped.
Remove the trim panel from door.
INSTALLATION
Replace any broken or damaged push-in fasteners.
Connect the power door locks/windows/mirrors wire harness connectors, if equipped.
Move the door trim panel outward and connect the handle-to-latch rods.
Position the trim panel on the inner belt seal and push down to seat.
Align the locating pins and push- Push-In Fasteners in fasteners. Press inward to secure.
Install the screws attaching the trim panel to the door inner panel.
Install the window crank, if equipped.
