Land Rover Repair: mylandrover freelander, filler plug, rear wheels

Question
how do i change or even get to my transmission fluid?????

idont even know where to check it...

do i take off the engine cover????

Answer
Hi Kelly,

here's the techsheet info:

Drain
1. Position vehicle on ramp.
WARNING: Observe due care when draining gearbox fluid as the fluid can be very hot.
2. Apply handbrake and position chocks under front and rear wheels.
3. Remove underbelly panel.
4. Position container under gearbox.
NOTE: The fluid should be drained with the transmission at normal operating temperature.
5. Clean area around drain plug.
6. Remove drain plug and discard sealing washer.
7. Allow fluid to drain.
8. Clean drain plug and fit new sealing washer.
9. Fit drain plug and tighten to 45 Nm (33 lbf.ft).
Refill
1. Clean area around filler plug.

Send me an email and I'll reply with the actual techsheet and diagram.

Regards,

JohnMc
jmcinnis64@hotmail.com