Motorcycle Repair: 98 flhtcu-i ECM high idle adjust, vacum leaks, senser

Question
QUESTION: bike high idles 2000 rpm,I've already covered possable vacum leaks,I was told that the ecm sould read .67volts with it turned on,I pulled the plug at the accuator but there is 4 pins at 2 pins I get 12.5 at the other 2 nothing,any ideas??

ANSWER: Is this somthing that just started or did you make any changes?
Mike

---------- FOLLOW-UP ----------

QUESTION: no it's been doing it since I bought it a year ago

Answer
You can try to adjust the idle from the idle screw and see if that works. You have to adjust it and then unplug the fuses for around 15 minutes and then plug them back in for it to set int he ECM.
The other thing is you might hav a bad throttle position senser or a bad temp senser, but you would have to have them tested.
Good luck and happy riding
Mike