Motorcycle Repair: fairing removal (follow-up), senser, wiring diagrams

Question
Hey Mike Thanks for answering my question. You said i would have to do alot of splicing which is not a problem. I have the service manual with all the wiring diagrams, problem for me is where do i start after unplugging everything just to get it running again.

So if you can give me a starting point that would be great.
Thanks  
Joe

Answer
You would have to check your wiring diagram. I am not going to be able to list everything for you. Follow the wires and anything that is a senser needs to be plugged back it. Anything that goes to the handlebars will need to be plugged back in.
Good luck and happy riding
Mike