Motorcycle Repair: QA50, flywheel puller tool, honda motorcycle

Question
I am not getting a spark when i kickstart the mini bike

Answer
Frank, they have a magneto ignition...

http://www.bikebandit.com/houseofmotorcycles/honda-motorcycle-qa50k1-1973/o/m926...  crankcase-alternator illustration.

Clean the points and set them to open at the F mark alignment on the flywheel. You can do this carefully through the slotted holes on the flywheel. If things are really corroded inside or you have to change the condenser, then you will need to contact a m/c parts house for a flywheel puller tool.

Make sure that the KILL switch is disconnected momentarily, in case it is grounding out the sparks, when you are troubleshooting. Use a fresh spark plug for testing spark.

Bill Silver