Motorcycle Repair: Turn signal replacement, suzuki s50, mail

Question
I smashed a rear turn signal on my '05 Suzuki S50 and have purchased a replacement. It appears that I have to remove the seat, but cannot figure out how to do so. I have removed 2 rear torque bolts, but still can't move the seat. What else must I do to remove the seat? Thanks for your help!

Answer
Terry,

-the seat has 2 bolts at the front and two
bolts on the sides further back.
-You may have to remove the frame covers to get at them.
-The covers have a screw at the bottom center and a bolt
near the top front.
This might help:
http://mail.thewrongtrousers.com/orbrit/S50SissyBar.pdf

-If this description doesn't match up, look for a key release
down by the right rear footpeg and/or one screw at the top rear
of the seat.