Motorcycle Repair: Steering stem bearing replacement, wingthings texas, clutch installation

Question
I read your comments about Steering stem bearing replacement. I would like any info you might have on the subject as I own an '03 gl 1800 and am about to tackle this task. Any tips would be appreciated. What orque tolerances? Use what the Manual says, or more? Thanks Roy Smith

Answer
Hi Roy,

Basically, follow the illustrated procedures in the service manual.

Visit these GL related tech links if you need additional support:

http://bbs.gwrra.org/scripts/board/discus.pl?pg=topics

www.electricalconnection.com/index2.htm

www.geocities.com/SouthBeach/Plateau/2800/gl1000.html

http://wings.astcomm.net/main.html

www.randakks.com

www.goldwing-world.com

http://msproul.rutgers.edu/motorcycle/gwfaq.html

www.partsnmoreforum.com/forum/viewforum.php?f=2&sid=bd440b013c03f7c2c36c17d483404c03

www.bikersbonanza.com/goldwing_accessories.htm

www.epilcher.com/gl1000/carbs.htm

www.wingthings-texas.com

www.wingworldmag.com/archives/march2004/magazine/department/workbench.html

www.bikebandit.com

www.electrosport.com

http://www.randakks.com/TechTips.htm

http://www.consolidateddiversions.com/gltip.html

http://archive.gwrra.org/board/messages/16685/7401.html?1000244811

http://www.crc2onlinecatalog.com/clutch_installation.htm

Respectfully,
Mark Shively