Motorcycle Repair: 1340 evo intake seals, dyna jet, jet kit

Question
Hi Mike,
I have a 94 ultra (1340 Evo), the intake manifold seals started leaking (would not idle for nothing), I changed them (rotten and cracked)and they still leak. any tricks to installing these seals? Also, while the carb was off I put on a high flow air cleaner and put on some free flowing slip-on's, what jet changes do you suggest as a base line?

Answer
When installing the seals, put a little grease on them so they dont get pinched and tighten the bolt evenly.
on the carb, I would suggest installing a Dyna-jet kit. It will give you more throttle responce, and get the jetting back to where is should be
Good luck and happy riding
Mike