Motorcycle Repair: Lights not working, cbr600f3, signal wires

Question
Hi, I was wondering if you could help me with an electrical problem I am having on my '95 CBR600F3.  I was trying to re-attach the right turn signal wires to their bulb, but when I started the bike something happened (blown fuse, kill-switch, ?) and now none of the electric components of the bike work except the headlight.  Any help with this would be much appreciated.

Answer
Hi Cisco, check your fuses, retrace your work. You may have pinched a wire or crossed them at the turn signal. Just double check everything carefully and if there is a blown fuse consider your self lucky. Get a test light to help you determine which wires are hot and which wires are ground.
 take your time and be careful

good luck
    randy