Nissan Repair: 1981 datsun, slave cylinder, master and slave

Question
The fluid from my master cylinder will not go into the slave cylinder any suggestions? thank you

Answer
Jessica,

If you have replaced the master and slave and the fluid is not moving down to the slave you will have to keep bleeding the system.  That is, puch the pedal to the floor and have someone crack the bleeder open and closed really quickly to purge the air from the system.  Then, repeat the process until fluid does come out.  If the master is not new that could be the problem.  Also, you could purchase a vacuum bleeder to expedite the process.  Put the suction on the bleeder and open it until clean fluid comes out, no air.  Those are the options...