Nissan Repair: Rotor on 98 Sentra, liquid wrench, rotor

Question
I have taken off the caliper and torque bracket, but can not remove the rotor.  How do I get it off?  Could it be rusted on?

Answer
Steve,

Yes, it is rusted on.  There are a couple of holes that you can run screws into to get it loose.  Also, WD40 or Liquid Wrench can be most helpful in getting the rotor off.  If all else fails use a dead blow hammer around the circumference to get it loose.  Be careful if you intend to reuse the rotor.  Also, use brake cleaner to get the lubricant off the rotor after you are done.