Questionreplaced battery, keyless still will not work. i double checked the battery size, it wes correct. please help.
AnswerAll transmitters that are to be used with your van must be programmed at the same time. Once you enter the programming procedure you must program all the transmitters during the programming session. Only those programmed during the last session will work with the vehicle. You can use this procedure to also eliminate a transmitter by not programming the vehicle to accept the transmitter when entering the programming session. Just remember to have all the transmitters you want to use with the vehicle handy when you start the programming session.
The procedure:
Enter the vehicle and lock all the doors with the power lock switch.
Insert and remove the key from the ignition six times within 10 seconds. The instrument lights will flash twice.
Turn the ignition key to the ACC position.
Press the "Lock" button on the transmitter once.
For additional transmitters, unlock the drivers door using the power door lock switch.
Press the "Lock" button on the additional transmitter. The instrument lights will flash twice, indicating that the transmitter has been accepted.
Repeat steps 5 and 6 for any additional transmitters. There is a limit of four transmitters.
