Pontiac Repair: 1992 pontiac, crankshaft position sensor, engine computer

Question
I left a message earlier for you but need to add to it. there is no pressure for fuel. Also no spark. replaced 3pk coil and ignition module. still no spark. I'm thinking fuel pressure reg. and crankshaft position sensor. My son ran it out of fuel. Then put gas in, drove home and the next day it would not start. He kept cranking on it to try to start it.So there is no spark and if you check fuel pressure there is barely a drip.

Answer
Well that is a different story altogether.. The cfact that is has no fuel and no spark is odd. possably a bad power feed to the engine computer??/ do you hear the fuel pump run when you turn the key to run. If not then there could be an issue with the ecm (engine computer) not commanding the pump on. A blowen engine control module fuse or a bad ground wire on the engine. being that it's missing 2 key components to run is very odd! !