RV Repair: wiring schematic on a gch10a-4e, skyline nomad travel trailer, switchplate

Question
Hi Bill, I have installed a 10 gallon atwood to replace my 6 gallon atwood. I have a 1999 skyline nomad travel trailer. The propane side works like a charm, But the electrical side not share on the wiring diagram because its not working from heater to on and off switch. I tried to install it myself and tried to connect it like the 6 gallon but not working. Is the wiring different?

Answer
Victor, You can tell if the wiring is the same by looking at the igniter board. If it has one plug on both they are the same. If the new one has 2 plugs to it then they are different. If they are different then you should have gotten a switchplate with 2 switches on it. If so they are wired separately and you will need to let me know so I can tell you what you will need to do. Thanks, Bill