Saturn Repair: Saturn SC2 brake bleeding, saturn sc2, hole in the middle

Question
I changed the rear brake pads (disk) and removed the brake line on one side - now the pedal goes to floor.
I added fluid to mstr cyl.
How do I blled the brake lines?
HELP PLEASE!!

BEK

Answer
Ho ok do u have 2 people  ifso go to the back ofthe car and on the caliper there should be a bleeder screw i think it is 8mm bolt with a hole in the middle get the person inside to pump th epedal 7-8 times then hold it down and u turn this screw until fluid or air comes out then tighten it and repeat process until no air. dont forget to fill up the resivoir.. good luck if u need more help let me know