Small Engines (Lawn Mowers, etc.): John Deere LT 155, john deere lt 155, input shaft

Question
Hello,

We have a John Deere LT 155 with a hydrostatic trans.  The mower worked well until a day or so ago-now it will not go forward or reverse.  Replaced deck belt and will not go into forward or reverse.  Also checked  the neutral lever on the back of mower to see if engaging-pushed in mower still won't go.  

Thanks
Shelly

Answer
Hello Shelly:

>>Sorry for the Delay. I have been Unable to Answer Questions Due to Health Issues. Thanks for Understanding.
>>Is the Drive Belt to the Transaxle Turning the Transaxle Input Shaft?
>>Does the Shift Lever Move?
>>Are you Sure you Didn't Knock the Transaxle Drive Belt Off one of the Idlers or the Engine Pulley?
>>Is the Transaxle Drive Belt on the Engine Pulley?
>>If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John