Small Engines (Lawn Mowers, etc.): Troy -Bilt Snowblower Track Reinstall, troy bilt snowblower, eye bolts

Question
I have a model 1028 troy bilt snowblower with track drive, the track came off on 1 side. I removed front plastic idler wheel and loosened eye bolt to try and put it back on but unable to. is there a trick or something else that needs to be done. Thanks for any help With 54" of fresh snow I need to get this thing going again

Answer
Hello Rick:

>>Go to this Site Addy, http://www.jackssmallengines.com/ and Select "Parts Look Up". Now Use the "Search for Model" Window and Locate your Units Breakdown/IPL for Online Viewing.
>>I am Assuming this is a Model #31AH7L74799 (2005) Unit.
>>Did you Loosen Both Eye Bolts?
>>You have to Loosen and Tighten Both Eye Bolts at the same Time or you will Not Move the Shaft enough to Replace the Track.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John