Small Engines (Lawn Mowers, etc.): replacing driven disk, center bolt, driven disk

Question
can you please tell me how to replace the driven disk on my snapper 281016be rear engine riding lawn mower? i removed the larger center bolt of the threaded shaft, but it doesn't seam to want to come off, what else do I need to do?

Thank You

Answer
Hello Gary:

>>You can View a Breakdown of the Mower at this Site Addy; http://www.snapper.com/manuals/ . Enter your Model Numbers (281016BE) in the Box Provided and Click Find Manuals.  Select Illustrated Parts List from the Manual List Provided. Now Download the Manual for Online Viewing.  
>>If I Understand your Question Correctly, then you Require a Drive Disc Puller. A Picture of this Puller is on Page 101 of 104 in the Service Manual that you can Download at the Site I Listed Above.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John