Small Engines (Lawn Mowers, etc.): craftsman brushwacker model#358795820 32cc, spark arrestor, exhaust port


Question
it was working fine it just stoped.replaced sparkplug and fuel filter in gas tank,still it won't start.when sparkplug was replaced it felt it was going to start but it just won't.

Answer
Hello Juan:

>>The Following is a Basic Instruction File for Doing a Diagnostic on the Engine for this Problem. Any Input is Appreciated. **Remove the Muffler and Make Sure the Exhaust Port is Clear. If it is, then Try to Start the engine with the Muffler Off. If it Starts and Runs Properly, then Clean the Spark Arrestor Screen in the Muffler or Replace the Muffler if Required.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John