QuestionSir
I have a Snow Chief SC320 snow blower and would like to know where parts are available, either on-line or a phone in service. I could pick the part out of a illustrated parts manual but I don't know the part number itself.
Thanks for your service
Paul
AnswerHello Paul:
>>General Power Equipment was the Parent Company of Atlas Power Equipment, Lawn Chief, Snow Chief and Wheeler. They All Became MTD.
>>Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
>>Generally the identification tag is on a part of the unit that, even after years of use, rarely needs replacement. For most of MTD power equipment, these tags are approximately 2" by 3" in size. They also have the MTD Products name, address and customer service phone number listed across the bottom. For hand held product, the tag is normally white and approximately 1" by 1/2" in size. Hand held i.d. tags are normally on an aluminum portion of the engine, somewhat set into the unit to protect the label from wear. (A bar code will also be on this tag.) Riding mower tags are located on the underside of the seat. For walk behind mowers this tag is found either on the deck or on the rear door of rear discharge units. Tiller model and serial tags are generally on the tine housing. **The model and serial tags for two-stage snow throwers are located on the bottom of the main gear housing which is often called the belly pan, while single stage snow thrower tags are next to the key and primer. For other products like log splitters, chipper shredders and edgers, tags can be found on the frame or main housing.**
>>Thanks.
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
