Small Engines (Lawn Mowers, etc.): Huskee lawn tractor, center bolt, pullys

Question
Hi, hope you can help me with this question, I am not sure how to properly replace a "V" belt on this huskee pro cut 22hp,50" cut, model 14AVgt. the mower appears to have been bilt around the front drive belt. Not sure about the proper way to change this belt. Need to remove the drive pullys from the engine? Thanks

Answer
Hello Richard:

Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers are Usually Located Under the Seat on a Sticker or Tag on the Body. The Engine Pulley will Usually have to be Lowered to Remove the Belt/s from the Engine Pulley. Remove the Center Bolt abd the Engine Pulley should Lower Enough to Remove the Belt/s. Thanks.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John