QuestionQUESTION: I have an older Troy Bilt Tiller. I think it is the one they call Horse. I want to change the transmission oil but can find no dipstick and don't know where to put the oil or how much oil to put in. There is a drain plug on the bottom and one on the side.
ANSWER: Hello Ken:
This Transmission is Filled Using the Plug on the Side. With the Unit Setting Level, Fill the Transmission Until the Fluid is Just Starting to Run Out of the Side Plug. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: Can you tell me what weight oil to use and what the approximate capacity is?
AnswerHello Ken:
Some Models Use 80W90 Gear Oil and Some Use SAE 30 Engine Oil. Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
