Small Engines (Lawn Mowers, etc.): Sears Tractor, tractor model, solenoid

Question
Hi - I have a Sears tractor model 917.255580 about 10 to 12 yers old. I replaced the seat switch and no result. I am now trying to install a new solenoid. I cannot figure out where the ignition wire attaches to the solenoid. I have 2 red wires from the battery going to one post on the solenoid.Then from the other post a red wire going to the starter. Where does the ignition wire attach to. Thanks Vinnie

Answer
Hello Vinnie:

The Ign Switch Wire to the Solenoid Connects to the Small Post at the Base of the Solenoid. To View a Breakdown of this Unit Go to this Site Addy, http://www.searspartsdirect.com/partsdirect/index.action and Enter the Model Numbers and Click Search. From this Page you can View Diagrams and Parts Lists for you Equipment Using the "View Sub Components" Section. Select the Electrical File. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John