Small Engines (Lawn Mowers, etc.): oil and gas mixtures, ounce plastic, gas mixtures

Question
sir i recently bought a bloven 2-cycle weed eater and i have everything to the part of mixing the gas and the oil it says to use a 3.2 ounces of the synthetic 2-cycle oil in 1 gallon of unleaded gas. This is my first weedwacker and i didn't know about the mixture stuff and all i have is a five ounce plastic fuel jug for my mower so how much of this stuff do i mix in that or should i buy a new jug

Answer
Hello Muneeb:

For Anyone that has 2 Cycle Equipment, I Suggest they Purchase a 1 or 2 - 2 1/2 Gallon Blue Kerosene Can (or Paint a Red Gas Can Blue) and Mark it "2 CYCLE GAS ONLY". Now Mix Up 1 or 2 Gallons of Fuel Mix at a Time. Remember to Shake the Can Each Time Before Refilling the 2 Cycle Engine. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John