QuestionQUESTION: I am trying to replace the starter solenoid and am having a problem removing it from the Starter. I have dropped down the Starter Assy. but can't remove it from its position.
my question is,can the starter Assy. or the Solenoid be removed without lifting the engine off its mounts.
ANSWER: Hello Carroll:
On Some Model JD Mowers the Engine May have to be Liftedd a Few Inches to Remove the Starter. Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: I have a John Deere 180 Lawn tractor,46" mower with FC540V Kawasaki engine.If the engine has to be raised,I would appreciate the steps to do that.
Thanks for your trouble,
Carroll
AnswerHello Carroll:
Usually, Just Removing the Engine Mounting Bolts Nearest the Starter and Loosening the Other Engine Mount Bolts will Allow the Engine to be Raised/Pried Up Enough to Remove the Starter. You can View a Breakdown/IPL of the Engine and Mower at this Site Addy, http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.H and Enter the Model Numbers and Click Find. Then Select the Sectional File. Then Select the Section of the Mower you Wish to View Online. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
