Small Engines (Lawn Mowers, etc.): bag for lawn/yard vacuum, vacuum bag, john bridgers

Question
John Bridgers suggested(1/23+/-/08 that I remind him of his willingness to provide dimensions and/or photos regarding a Wards Signature vacuum bag.  Could this be forwarded to him?

Answer
Hello Carl:

Thanks for Getting Back to me. I have had it Rough the Past Few Months. Bad Weather. I will Track the Information Down Again. I have it in a File. I am Still Rather Busy to Do Much Research, But I will Take the Time this Evening to Get the Dimensions to you. Thanks Again.

Respectfully

John

I Haven't Located the Measurements yet. My Wife will be Back from her Parents Today and I Feel Sure she knows where the Information was Stored. Thanks for being Patient.

Respectfully

John

Hi Carl:

Here are the Measurements of the Vacuum Bag. The Sides are 36" Tall and 20" Wide. The 2 Sides are Sewn to a Center That is 24" Wide and Leaves a Section for a Zipper. The Zipper Area is Designed to Open the Bag for Removal of Trash/Leaves. There is a Mesh Vent with a Cover in the Left 36" X 20" Side. The Cover is Loosely Tacked Over the Mesh Vent. The Inlet Hole can be Cut and Inserted to Match your Vacuum. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John