QuestionQUESTION: My snowblower ate a neighbor's newspaper which is now jammed in the second stage auger. How do I release this auger from the drive so I can back it out?
THANKS in advance for any help you can provide.
ANSWER: Hello Bob:
Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: MTD 644E. Full model no. as listed on the unit:
31BS644E129
310468
Thanks
AnswerHello Again Bob:
Thanks for the Numbers. You can View a Breakdown/IPL of this Unit at this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select the Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM and Enter the Model Numbers (31BS644E129). Then Double Click on the Model in the Results Area. Now you can Select the Section of the Unit you Wish to View. From Looking at the Breakdown/IPL of this Unit, it Looks like a Standard MTD Snow Thrower. If you have the Controls in Neutral and Can Not Turn the Auger, then you May have to Disassemble Some of the Assembly in Order to Remove the Obstruction or Remove the Auger Drive Belt from the Pulley. The Belt May be Grabbing the Pulley when you are Trying to Turn the Auger in Reverse Rotation to Remove the Obstruction. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
