Small Engines (Lawn Mowers, etc.): 1994 skidoo mxz 470, mxz, ground wires

Question
hello i have an mxz 470 i had to replace the outter seals on the crank and after i was done and put it all back together my motor lost spark i'm tried setting the little spark thing at 1400 thousandents of an inch and motor still has not fire even comeing outta the wires...do you have any idea what it may be?

Answer
Hello David:

Are All the Ground Wires Connected? Have you Tried a Different CDI (Ign Module) Box? Disconnect the Shut Off Wire from the Kill Switch and Check for Fire. Do you have the Harness Pinched so that it is Grounding the System? Is teh CDI Pickup Assembly Mounted Correctly? Has Another Pickup Assembly been Used to Check the Pickup Assembly? If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John