Small Engines (Lawn Mowers, etc.): Snapper drive /clutch, snapper riding mower, rubber edge

Question
Last week while using my Snapper riding mower, a SR1433, the clutch seemed real jerky. In fact while vacuuming leaves with the bagger attachment the mower seemed like it couldn't make up it's mind if it was going to go or not. I took the mower home thinking the drive disk with the rubber edge was out of adjustment. When I lifted the mower and took off the disk off, I found The disk with the 4 studs is loose. I don't see how to take off the 15/16 nut on the shaft so I can remove the plate with the 4 studs. Do you know if there is a place where I can look at a parts blow up diagram

Answer
Hello Dennis:

How About a Couple of Sites? 1- You can View a Breakdown/IPL at this Site Addy, http://www.emerichsales.com/parts-browse.asp and Select Shop Online Parts Look Up. Now Select the Model Tab. Then Select the OEM (Snapper). Then Enter the Model Numbers. Now Double Click on your Model. 2- You can View a Breakdown of the Mower at this Site Addy; http://www.snapper.com/ and Select Publications in the Upper Right Corner. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John