Small Engines (Lawn Mowers, etc.): tri-fuel generator wont run on propane, briggs and stratton, hp briggs

Question
Hi, I've been booted off my previous thread, where I've been working on getting my 8 hp briggs and stratton generator [model: 195437  type: 4023 01  code: 90021410] to run on propane.  My earlier thread was about getting the carburetor adjusted, and when inquired about failing to start it on propane, you asked for the model # to get the proper manual.  You mentioned venting the air from the propane line from the carburetor inlet.  I would need some more clarification on what you mean by that.  Thanks so much.
Elizabeth

Answer
Hello Again elizabeth:

Sorry, but that Does Happen Sometimes. Yes, I Remember Asking for the Generator and Engine Numbers. There are Several Types of Propane Deliverly Systems Used on Generators and the Generator Model and the Engine Model Numbers (which you did Send) will Assist me in Locating the Proper Manuals so I can Better Assist you. Loosen the Inlet Line at the Carburetor and Allow the Line to Vent Until the Propane is Present. Do this Only in a Well Vented Area. Thanks. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John