Small Engines (Lawn Mowers, etc.): Poulan PRo2000LE blower, air gap, excellerate

Question
My one year old blower had no spark so I changed the ignition module,now it starts but wont hardly run off of full choke and wont excellerate.Would you know if the air gap is critical,I think I set it for 10 thousandths?.Any Ideas would be appreciated.

Answer
 Hello Dorene:

 Remove the Muffler and Check the Exhaust Port and Muffler for Blockage. Check the Spark Arrestor Screen in the Muffler Also for Blockage. If these are Clear, then the Carburetor May Need Adjusting or Cleaned. You can View a Breakdown/IPL or a Service Manual at this Addy http://www.poulanpro.com/poulanpro/searchProducts.do The Coil is Set to .015in to .020in. from the Flywheel. The .010 would Not Cause the Problem you are Having. Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John