Small Engines (Lawn Mowers, etc.): 8hp briggs&stratton wood chipper engine, briggs and stratton, briggs stratton

Question
i had my chipper running when it bogged down and stalled.itried to restart but this failed.ido have spark.gas flow to carbureator is ok.itook off air filter poured a little gas down there then it started but only ran till the   little bit of gas ran out.it also appears that the engine is not getting gas   when pulling on the rope.please advise      i got these numbers off the engine model 190412  type 3107.01 code 89060712  

Answer
 Hello Bill:

 It Sounds like the Carburator Picked Up some Trash/Water. I Suggest you Clean and Rebuild the Carburator. Soak the Carburator Overnight in Cleaning Solution to Remove All the Varnish that is Formed by the Gas Over Time. Go to this Addy http://www.outdoordistributors.com/ and Click on the B. Then Click Briggs and Stratton. Then Click Dont have Manual. Select the Number 19 Folder and then Scroll Down to the Model of your Engine. Download this File. It has a Breakdown of the Carburator and the Breakdown will Assist you in the Cleaning and Rebuilding of the Carburator. Hope this Helps. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John