Toyota Repair: 93 toyota pickup v6, air flow meter, airflow meter

Question
after i do this, what dose it tell me?
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
I have no power to my fuel pump. fuses are good and if i pull the efi relay out and jumper the high current side nothing changes. so what am i missing? the vehicle died and will not start, it has good spark & cranks strong. the fuel pump runs when i run a hot wire to the connector.
-----Answer-----
Open the diagnostic connector under the hood, it's located near the passenger side of the engine near the battery, with the key on place a small jumper wire between the terminals Fp+E1, does the fuel pump run when doing this and does the engine start?

Answer
It tells you that the fuel pump wiring from the front to the back is good exept for the relays, doing this bypasses the fuel pump relays and the air flow meter besides the EFI relay there is a circuit opening relay that turns the fuel pump on and off, this is controlled by the air flow meter, there are contacts in the airflow meter that turn the relay on to run the fuel pump and turn it off on deceleration.