Toyota Repair: front rotor removal, head bolt, penetrating oil

Question
i have a 2002 tundra 4wd. my front rotors are warped. all information i can find says rotors should just pull right off without any problems. i cant get the rotors to even budge is thier something i dont know or people arent telling me that is needed to be done.

Answer
there are 2 small holes in the flat part of the rotor by the hub that take a 12mm head bolt. Thread two bolts into the holes and it should press the rotor outward.
Use penetrating oil.
Alt method is to whack the rotor with a soft dead blow hammer so as not to dent or mar the rotor.

Mike