Toyota Repair: 1990 Toyota Camry Blown fuse(s), 1990 toyota camry, fuse block

Question
Recently when changing the alternator on my 1990 Camry 2000 engine I failed to disconnect the battery ground and shorted the wire running from the alternator back to the battery. The ALT fuse on the fuse block mounted to the postive post on the battery has 3 fuses in it. The two on the outside will just pull out but the ALT 80 amp in the middle does not. Is this fuse mounted differently and how do I replace it. Is there any other breakers or fuses that may have blown when it shorted out? The ALT is the only readily visible that I have seen. Thanks for your help.

Answer
The alternator fuse is bolted to the wire connectors, you will have to pull the fuse holder up by releasing the plastic tabs with a small screwdriver then you can get to the bolts to replace the fuse, make sure the battery is disconnected before attempting this. Check the rest of the fuses especially the EFI fuse.