Tractor Repair: Cub Cadet 1200 Clutch, shock absorber, throttle cable

Question
Clutch was repaired 3 weeks ago.  Throttle cable broke upon inspection Noticed that one of the teats on the clutch had broken off %26 the pin was gone, Also one of the other pins was missing; thus, only 1 pin was holding it on.  I have been told the engine mounts may have needed replacing. Does the engine have to be pulled in order fix the clutch, exposing the mounts condition.

Answer
don't know this tractor but yes the engine will have to be pulled away from the gearbox to replace the clutch if the fingers on the clutch are getting damaged it could well be engine mounts causing it but it could also be a bad release bearing or damaged flywheel(but only if its a flywheel with a built in shock absorber)