Volvo Repair: 1995 960 Driver side mirror repair, elbow grease, mirror repair

Question
QUESTION: How do I remove the mirror from the car -- I've unbolted it, but can't see where the electrical cable connector is -- Is it in the door? -- Do I need to remove the door cover?

ANSWER: James, you need to remove the panel to get to the connector.  Remove the inner door pull moulding, remove the small cover on the door pull and remove the 25 torx.  There are 3 clips at the bottom of the panel.  Remove those also.  Panel will come off now.  ROger

---------- FOLLOW-UP ----------

QUESTION: Roger -- thanks for info -- Now can you explain how to take the  mirror assemble out of the outer plastic housing -- I need to fix a broken connector which attaches the mirror to the motor drive assemble -- thanks --

Answer
James, if I remember correctly, you just need to take the mirror off and then you can access the motor and such.  There are screws there also.  The plastic housing just comes off with a little elbow grease and possibly a small screwdriver.  Its been a while since Ive had to take one of those apart.  Roger