GM-GMC: 95 GMC 4wd 350 Wont start, no spark, fuel pump, rotor

Question
Have replaced the fuel pump, icm, checked fuses that we know of.  Still, no spark to plug.  It will crank but obviously won't start.

Answer
Have you checked your cap and rotor?  Pull off the cap and inspect the terminals, replace it if necessary, if everything looks ok, turn the engine over with the cap off to ensure the distributor is turning.  Check the rotor also while you have the cap off.  If everything checks out there.  Check the coil or swap it with a known good one.  Try those few things and see where you get.
Hope this helps