GM-GMC: REMOVAL OF ENGINE, power door locks, serial data line

Question
Im looking to remove the 2.2l engine and tranny and keep what i can stock ac,heater, etc. and install a 350 chevy in my 1999 s10.My question is besides the engine and tranny what else need to come out and what need to stay (pertaining to computer,wires, etc.)The 350 will be carburetored so most of the wires and such wont be used.Any answers will help me start my project and will be appreciated.thank you
                                    jerad

Answer
Hate to tell you this but.....this may be a bad idea, your 99 s10 uses a Power control module(PCM) Transmition control module(TCM) Body control Module(BCM) and various other modules to control the engine, tranny and accessories. you will definetly have a "check Engine light that will never go out, and you may have problems with any accessories like A/C power door locks, windows, powers seats, etc.....All the modules comunicate constantly with each other on a serial data line and there will be problems if one is missing from the "Loop" Its a cool swap to try but an older S10 may be a better start unless you are willing to get into heavy elecrical diagnostics and repairs.