Truck Repair: ntc400 cummins, dataplate, valve adjustment

Question
i need the injector and valve settings for this engine

Answer
Firstly, you need to check the dataplate on the engine to determine the value for intake and exhaust valve lash. But generally for ntc 400 or n14 series, you have 0.014 inch for intake and 0.027 for exhaust. confirm through the dataplate and stick to the value therein.
secondly, the dataplate will indicate the injector adjustment type either zero lash or normal traveldepending on the injector type.
You also need to have the injector and valve adjustment sequence.i.e A, B, and C position with corresponding injector and valve to be set at each position.
hope you find the above useful.