Fuel & Cooling Parts - Buyer’s Guide - Modified Magazine

Flex-a-lite
Nissan 240SX electric fan
Flex-a-lite has developed the new compact dual electric fan with custom brackets for mounting for ’89–98 Nissan 240SX. The unit replaces the existing belt-driven clutch and fan, increasing gas mileage, horsepower, extending water pump life and reducing drag on the engine. The compact electric fan measures 25.500x12.375x3.500 inches, pulls 2,029 cubic feet per minute and draws up to 14.5 amps; one-piece, glass-reinforced nylon shroud surrounds dual 11-inch fan blades.
flex-a-lite.com

Blackworks USA
Silicon radiator hose kits
When upgrading your engine’s performance and horsepower, it’s essential to also upgrade your cooling system. The BWR radiator hose kits are handcrafted to ensure the highest quality. With the newly designed multi-ply (one of the only 4-ply kits on the market) design, these hoses will handle the high temperatures and higher pressures produced by high-performance Honda/Acura engines. BWR’s kit is ideal for your race car or daily driver.
bwrusa.com

Tomioka Racing
EVO X fuel rail kit
The 4B11 engine from the Mitsubishi Evolution X is a power-hungry monster, so keep it well fed with the Tomioka Racing high-volume fuel rails. This fuel rail can support up to 650 hp and comes with all the fitting and accessories you need for a quick and easy install.
tomiokaracing.com

DeatschWerks
Side feed fuel injectors
These side feed fuel injectors are a drop-in fitment for the most popular S-chassis engines: KA24DE, SR20DET and RB25DET. Every set is flow-balanced in-house by DeatshWerks’ highly trained technicians and a custom flow report for your injectors is included. Available in flow rates of 550cc, 810cc and 1,000cc, they’re sure to provide the fuel you need for the power you want.
deatschwerks.com

DeatschWerks
300-lph fuel pump
The DW300 is a 320-lph in-tank fuel pump that’s a drop-in fitment for many applications. This 320-lph pump flows 25 percent more than competitors’ 255-lph pump. At the same time, the ultra-quiet turbine impeller takes the whine out of the high-flow pump experience. The DW300 is backed up with a no-fault, three-year warranty and comes with an application-specific fitment kit.
deatschwerks.com

Flex-a-lite
Fuel cooler
Flex-a-lite has developed a two-pass plate and fin cooler to dissipate fuel heat. The cooler fuel will maximize fuel energy output to the engine and prevent vapor lock caused by high-performance fuel pumps. The entire unit weighs only 8.5 ounces and measures 11.75x3.75x0.75 inches. Fuel coolers come with copper tubing, aluminum fins, 6 AN billet aluminum fittings, and Flex-a-lite’s GatorClip mounting hardware.
flex-a-lite.com

Samco Sport
Silicone hose kit
Samco Sport high-performance silicone hose kits are available for many applications, including the popular Nissan S14 SR20DET. Kits include coolant and ancillary hoses and include stainless steel hose clips to complete the installation.
motovicity.com

Nismo
R-Tune 350Z power steering oil cooler
This power steering oil cooler is designed to maintain better power steering function during extreme conditions and replaces the standard power steering cooler.
nissan4parts.com

Turbosmart
FPR series fuel pressure regulators
The installation of performance fuel injectors or a high-flow fuel pump requires the use of an aftermarket fuel pressure regulator to allow pressure adjustments while maintaining a stable base pressure. The FPR 800 is ideal for modified street cars with up to 800hp fuel systems using pump fuel. Turbosmart also offers other sizes, which can support up to 2,000hp race applications.
turbosmartusa.com

Fuelab
529xx Series fuel pressure regulators
Fuelab has released a new electronic fuel pressure regulator (529xx series) that works directly with its Prodigy line of fuel pumps to reduce heat buildup and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator, then let the electronic regulator’s demand-based speed control take care of the rest.
fuelab.com

Fuelab
Prodigy Series fuel pumps
Fuelab has eight cutting-edge fuel pump models, ranging in different performance levels; lightweight, highly efficient, and speed controllable are just some of the features that set Fuelab apart from the competition.
fuelab.com

HyperFlow
Subaru front- and top-mount oil cooler kits
A standard front-mount oil cooler will obstruct airflow into the radiator — however, the concept of the HyperFlow top-mount oil cooler is to use the space normally occupied by the standard intercooler under the bonnet scoop. In combination with relocating the position of the horns, the larger front intake cutout and decreasing the fins per inch on the HyperFlow kits help provide excellent airflow to the radiator.
jrponline.com

BLOX Racing
Fuel Management Unit
The BLOX Racing FMU is designed for use on fuel-injected, forced-induction vehicles using the OEM electronic engine management system. As with any forced-induction application, additional fuel is required for the engine to operate properly and make maximum power. The BLOX Racing FMU will increase the engine’s fuel pressure, as the pressure in the intake manifold increases. BLOX Racing offers universal FMUs with fixed ratios of 4:1, 6:1, 8:1, 10:1 and 12:1. Recalibration kits are also available and sold separately.
bloxracing.com

Tomioka Racing
Universal adjustable fuel pressure regulator
Tomioka Racing Pro Series fuel regulator is made for high-horsepower cars with upgraded fuel systems. The regulators have been outfitted with a 39mm diaphragm for the perfect amount of fuel flow. Constructed from high-quality billet aluminum with an anodized blue steel finish, this bad boy is good for 1,000 hp.
tomiokaracing.com

Mishimoto
Hyundai Genesis Coupe aluminum radiator
Mishimoto has developed a performance aluminum radiator available for the ’10 Hyundai Genesis Coupe. This is the ideal upgrade to your stock Genesis Coupe radiator. Having a turbo setup produces a great amount of heat, and by replacing your current Hyundai Genesis radiator with a Mishimoto performance aluminum radiator you’ll undoubtedly notice a cooler, more efficient running engine.
mishimoto.com

Earl’s
TEMP-A-CURE oil coolers
Earl’s offers race-proven, lightweight and efficient oil coolers designed to fit in the smallest practical space. Any performance vehicle can benefit from the TEMP-A-CURE difference; tow vehicles and passenger cars can realize extended engine and/or transmission efficiency and life with an Earl’s TEMP-A-CURE oil cooler. The coolers are available in a wide variety of shapes, sizes and inlet/outlet sizes.
holley.com

HKS
EVO X fuel delivery upgrade kit
Ideal for up to 500 whp, this comprehensive Mitsubishi EVO X fuel delivery kit includes an anodized aluminum high-volume fuel rail with adapter fittings, 800cc/min injectors (4), an upgraded high-volume fuel pump, mounting hardware and seal kit. If you’re looking for an all-in-one kit to safely support the additional horsepower in your EVO X, this kit is for you.
motovicity.com

Tomei
Fuel injectors
Tomei injectors are a direct replacement upgrade for the stock injectors, specifically chosen for each Nissan or Mitsubishi engine to deliver optimum results. Sizes range from 550–740cc.
tomeiusa.com

BLOX Racing
Aluminum radiators & slim fans
BLOX Racing aluminum radiators are a perfect upgrade for any high-performance or racing application. All radiators are 100 percent brazed aircraft quality aluminum and feature lightweight 2-row cores. Whether you already have a high-performance radiator or are planning to purchase one, the BLOX Racing electric slim fan will deliver more air to the radiator and significantly aid in keeping your engine as cool as possible.
bloxracing.com

Metalworx
Custom fuel cells
Metalworx offers custom fuel cells fabricated to any dimensions. Made from 0.125-inch-thick, 0.125 aluminum, each Cell is baffled, pressure-tested and comes with mounting tabs according to the customer’s preference. These fuel cells have the option to mount the stock sending unit or aftermarket sending unit, and each fuel cell comes with a one-year warranty.
metalworxinc.com

Koyorad
Honda V-Series radiator
The first radiator in a new series from Koyorad will be for Honda K-series engines transplanted into the ’94–01 Acura Integra DC2 chassis. Unlike this vehicle’s conventional OEM down-flow radiator, Koyorad’s cross-flow design improves heat dissipation by lengthening the coolant path from side to side and also features Koyorad’s N-FLO dual-pass partition. This partition routes coolant through the core twice for improved performance when engine room is limited.
koyoradracing.com

Nismo
Nissan Motorsports PWR performance radiators
PWR performance products specialize in and manufacture complete radiators and cores for race, street, drag or OEM replacement applications. All PWR radiators are manufactured by hand using high-grade aluminum with a unique wider tube configuration and revolutionary louver fin design angle, which maximizes the cooling efficiencies and disbursement of heat.
nissan4parts.com

Koyorad
Nissan S-chassis SR20DET radiator
Koyorad offers a robust all-aluminum, dual-pass radiator for owners with SR20DET outfitted Nissan S13, S14 and S15s. Unlike the conventional single-pass OEM radiator, Koyorad’s N-FLO design incorporates a weld-in partition, which improves heat dissipation where engine room is limited. The 53mm core increases capacity, which means increased heat transfer and cooling.
koyoradracing.com

Aeromotive
340 Stealth fuel pumps
Although the 340 is similar to other OEM replacement fuel pumps in its fitment into factory fuel tanks and hanger assemblies, the 340 blows away the competition, boasting more than 340 lph of flow at 40 psi. These high-output, in-tank, electric fuel pumps are direct bolt-in replacements for more than 65 popular EFI applications.
aeromotiveinc.com

CBRD
Aluminum radiators
Chad Block Racing Development performance radiators are a drop-in replacement for the OEM GT-R and Mitsubishi Evolution radiators. Providing superior cooling while still fitting in the factory location, CBRD’s lightweight racing radiators use only the highest-quality materials available. The end results are more efficient cooling, clearance for big turbo kits and lighter weight.
cbrdspeedfactory.com

M7 Japan
Oil cooler kit
M7’s oil cooler kt is something every true enthusiast will appreciate. Its universal fit makes it a great asset to any turbo car. The M7 cooler’s exclusive “tube and fin” designed cores are high grade with larger-capacity end tanks, which allow more oil to bypass and cool efficiently.
m7japan.com

RC ENGINEERING
Fuel Injectors
RC Engineering has a large selection of injectors available for a wide range of high-performance or custom racing applications. Available as either top- or side-feed, sizes range from 155–1,600cc, depending on application. RC Engineering also offers fuel injector cleaning services.
rceng.com

Aeromotive
EFI fuel pressure regulator
With a highly competitive price, the new EFI bypass fuel regulator from Aeromotive is proof that you don’t have to sacrifice performance and precision control for the sake of your budget. This regulator encompasses features and benefits found on all Aeromotive regulators, yet in a new smaller and lighter package. Capable of supporting applications up to 1,000 hp, the 13129 EFI Bypass Regulator can handle the most aggressive street machines.
aeromotiveinc.com

SARD
Fuel pressure regulator
The SARD adjustable fuel pressure regulator ensures proper, reliable fuel delivery on naturally aspirated and turbocharged vehicles. FPRs ‘regulate’ the pressure of fuel in the system to ensure that fuel delivery is stable under various loads. Fuel pressure regulators are recommended for any vehicle being modified for more power. Some vehicles may require adapters for proper installation.
more-japan.com

Mishimoto
Universal oil cooler kit
Enthusiasts who push their high-performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. The Mishimoto Universal 19-row oil cooler kit will extend the life of your engine by ensuring your essential high-wear engine components such as piston rings, skirts and cam bearings are sufficiently lubricated with cooler oil. Included with the purchase of the 19-row oil cooler kit are high-quality, stainless steel braided hose lines and all necessary adapters for universal installation.
mishimoto.com

ARC Magic
Aluminum radiator
ARC SMC aluminum radiators are manufactured using a unique micro-tube method that is exclusive to ARC. This method increases the internal surface area by using many layers of tubes and brings forth an improved efficiency of nearly 30 percent over stock.
mackinindustries.com