Auto body repair & detailing: Dimpled rear bumper on 2003 Chrysler Voyager, chrysler voyager, screw driver

Question
Someone struck the bumper of my van (I realize it's plastic) and "Dimpled" the spot it struck
(upper right corner).  I'd like to push-pop it
out if there is a way.

Answer
You need to reach it from the inside and push. You can use a heat gun or blow dryer to heat up the plastic from the outside first. careful not to burn the paint. Then just push on the dimple from the inside with the back of a screw driver handle. sometimes you need to hold the dent out while the plastic cools to hold the shape.
           Thank you for the question!
           Ken