Auto body repair & detailing: blend in scoop, body filler, auto store

Question
hello, me again, I managed to drill out the rivets in the scoop and bonded the scoop to the hood with a fiberglass mix, my question is should I use more fiberglass to blend in the scoop or should I use bondo filler?  Thank you for your time and expertise.

Answer
Grind areas that need body filler. I would not use Bondo that is old school stuff. Go to your auto store and get the very best bondo like filler they have. You are done with the fiberglassing. Use a premium body filler. Sand it with 40 grit After it has set up. like twenty min. or so. if you let it set overnight it will be as hard as a rock. after you get it smooth recoat and sand out with 80 grit. then it is ready for primer.

        Good luck on the scoop

                    Brian