QuestionThe van turns over but will not start the gauges inside flip all the way over to thr right side.It has gas in it could you please tell me what it could be?Thanks
AnswerHi Angel,
Typically a body control module malfunction and/or an engine computer malfunction will cause what you describe.
Also, before replacing either the BCM or ECM, check the coil pack module. It is a typical issue when one of these vehicles fails to start but I don't think I've ever seen it peg the gages. But that doesn't mean it's not possible.
Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).
Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php
