Car Alarms: Cobra Car Alarm 2112, cobra car alarm, dash area

Question
Hi!! I took my car off the road for about a month to fix body damage while i was doing this my car battery died!! Since i charged the battery back up the alarm is constantly on and my key fob wont allow me to turn it off!! This leaving me unable to start the car!! Any ideas on how to syncronize the key fob with the alarm please?? Also the alarm is known as Cobra Traq5!

Answer
Alrighty, not familiar with that system but try this:

  You'll need to set off the alarm for a few seconds.
then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried. This is override/reset.

See if this also applies to yours.

ALARMTEK
CARALARMSTORE.COM