Car Alarms: car alarm, crown vic police interceptor, valet mode

Question
when I use a regular key to unlock my 2000 crown vic police
interceptor the alarm goes off. when I use the keyless remote it does not go off. How do I disegage the alarm

Answer
Should be no problem really.
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM