Car Alarms: 92 ACURA MAXI GUARD ALARM, valet mode, dash area

Question
BOTH REMOTES WILL NOT WORK AND CAR OF COURSE WILL NOT START AND ALARM KEEPS GOING OFF, I JUST NEED TO GET IT GOING TO TAKE IT TO A SHOP

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM