Car Alarms: security alarm grand cherokee 93, side kick panel, grand cherokee

Question
I have a light truck grand Cherokee year 93 motor 6 cylinders, this presenting/displaying a fault of security alarm, which does not allow starting, since security in the frontal panel has activated the alarm we. It lets flash when turn switch of the back floodgate, but when I place the key in ingnition and turn advanced not check engine, and in a time of 1 “security” make a draft appears the word and does not ignite the motor. Please I need aid from you who you know the system… Thanks.

Answer
Ok, Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
VIOLET/YELLOW (-)  located in the DRIVER'S SIDE KICK PANEL
in the"BLACK PLUG".

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com