Alfa Romeo Repair: Clutch problems, clutch master cylinder, clutch mechanism

Question
good morning
    I sent an email about 2 weeks ago and wasn't sure if it got through.  When i pum the clutch, it goes in and out too easily and when I look at the clutch cylinder the piston is going in and out, there is fluid still in the resevoir but the clutch doesn't seem to build up any pressure.  Do I need to replace the clutch master cylinder?

Merry Christmas

Stu Stopkey

Answer
Your previous e-mail did not get through.

If the slave cylinder piston moves in and out with application
and release of the clutch pedal, the problem is with the
clutch mechanism.  The clutch assembly must be removed to
determine if the fork is bent or the pressure plate has
collapsed.