QuestionQUESTION: we replace the timing belt and now our car wont get out of limp mode tried to run dianos. but no power to dianos link. the trans shop wants to pull trans but the prob is elect. any ideas
ANSWER: Hi Don,
If you don't have power on the red wire at the blue data link connector under the dash, then check fuse 11 in the fuse box under the dash which supplies the power and/or fuse 56 in the power center under the hood which supplies fuse 11. Once you get that power going you should be able to readout the fault code in the transmission controller. Let me know if you get such a code.
Roland
---------- FOLLOW-UP ----------
QUESTION: thanks for taking the time to help us out we just spent 800 and still dont have a working car . anyway we noticed that our wiring harness is kind of messed up is there some place you know that sells them i cant find any on the internet
ANSWER: Hi Don,
Other than a pull-it-yourself wrecking yard, I don't. Let me know any specifics and I can tell you or send you the wiring diagram for that area.
Roland
---------- FOLLOW-UP ----------
QUESTION: we have power to the fuses mentioned.any more ideas
AnswerHi Don,
You mentioned no power to the connector as the reason for no code. Again, which connector (engine compartment or under the dash)? I can tell you the pathway to get to the connector with that power if that is indeed why you have no access to the codes.
Roland
